2-Pack RS550 DC Motor 8Teeth 24V 25000RPM Electric Motor Drive Engine High Speed Motor Upgrade for Powered Wheels Kids Ride on Toy Car Replacement Parts Accessory (8Teeth)

Model Number: RS550Voltage: 24VNo Load Current: 1.1AWorking Current: 6.53ANo Load Speed: 25000RPMTorque: 1555.3g.cmPower: 200WShaft Diameter: 3.175mmGear Teeth: 8 - 19 TeethCommutation: BrushInstallation Screw Size: M3 (Not included)Installation Screw Spacing: 25mmRotation Direction: CW/CCWStall Current: 45AHow to choose a motor for electric ride on vehicles:1. Confirm your motor model is RS550/RS555, or measure motor diameter about 37.2mm, motor body length about 57mm, and shaft total length about 85mm.2. Confirm the voltage of your motor and choose a motor with the same or similar voltage.3. Confirm the number of teeth of your motor, make sure to choose the motor with the same number of teeth, and verify that the outer diameter and face width of the gears are the same or similar.Note:1.The RS550 motor has multi voltage and multi gear teeth combinations, which can be adapted to many electric vehicles on the market, but there are too many brands and models of electric ride on vehicles, which makes it impossible for us to identify them all, so please compare the model and gear of the original motor before purchasing. It must be the same model to replace it(The RS550 and RS555 motors can be used interchangeably.).2.This motor rated voltage of 24V, and capable of normal operating within a DC voltage range of 12-24V. The lower the input voltage, the lower the motor speed will be. Do not exceed 24V input voltage, otherwise it may be damaged easily.3.This motor can rotate in forward and reverse directions. If the rotation direction is reversed, simply swap the positive and negative connections to correct it.

• High-Speed RS550 DC Motor: Universal 12V–24V voltage compatibility with variable speed output: 12,000 RPM (12V), 18,000 RPM (18V), and 25,000 RPM (24V). Delivers enhanced torque and climbing power, perfect for upgrading your kid’s ride-on car or DIY electric vehicle to conquer slopes and rough terrain effortlessly
• Material: Long-Lasting & High-Efficiency OperationCrafted with a stainless steel shell and pure copper coil for maximum conductivity and power output. Built-in cooling fan ensures superior heat dissipation during extended use, preventing overheating and ensuring stable
• 8-19 Teeth Metal Gear: Equipped with a wear-resistant metal gear (8–19 teeth options) that’s pre-assembled securely on the motor shaft—no tedious manual assembly required. Critical Note: Please match the tooth count of your original motor to ensure a perfect fit for your ride-on vehicle
• Easy to Install: Front motor mounting design fits 2 x M3 screws for a tight, stable fix. Comes with a welding-free connection wire that plugs and plays directly, allowing you to replace damaged or rusty motors in minutes without professional skills
• Wide Compatibility: Ideal for Ride-On Vehicles & DIY Electric ProjectsPerfect replacement motor for electric ride-on cars, battery-powered toys, electric go-karts, ATVs, rock crawlers, and various DIY electrical builds